List of Publications for Michael S. Selig

Department of Aerospace Engineering
University of Illinois at Urbana-Champaign, Urbana, Illinois 61801

Last Update 9/6/98

Books

  1. Lyon, C.A., Broeren, A.P., Giguere, P., Gopalarathnam, A., and Selig, M.S., Summary of Low-Speed Airfoil Data, Vol. 3, SoarTech Publications, Virginia Beach, VA, 1998, 418 pages.
  2. Selig, M.S., Lyon, C.A., Giguere, P. Ninham, C.N. and Guglielmo, J.J., Summary of Low-Speed Airfoil Data, Vol. 2, SoarTech Publications, Virginia Beach, VA, 1996, 252 pages.
  3. Selig, M.S., Guglielmo, J.J., Broeren, A.P. and Giguere, P., Summary of Low-Speed Airfoil Data, Vol. 1, SoarTech Publications, Virginia Beach, VA, 1995.
  4. Selig, M.S., Donovan, J.F., and Fraser, D.B., Airfoils at Low Speeds, SoarTech Publications, c/o H.A. Stokely, Virginia Beach, VA, 1989, 398 pages. (over 3500 copies in circulation)
Articles in Journals

  1. Giguere, P. and Selig, M.S., "Low Reynolds Number Airfoils for Small Horizontal Axis Wind Turbines," accepted for publication, Wind Engineering.
  2. Gopalarathnam, A. and Selig, M.S., "A Multipoint Inverse Method for Multi-Element Airfoil Design," accepted for publication, Journal of Aircraft.
  3. Saeed, F., Selig, M.S., Bragg, M.B., and Addy, H., "A Hybrid Airfoil Design Method to Simulate Full-Scale Ice Accretion throughout A Given a-Range," accepted for publication, Journal of Aircraft.
  4. Giguere, P. and Selig, M.S., "New Airfoils for Small Horizontal Axis Wind Turbines," accepted for publication, ASME Journal of Solar Energy Engineering.
  5. Jasinski, W.J., Noe, S.C., Selig, M.S., and Bragg, M.B., "Wind Turbine Performance under Icing Conditions," accepted for publication, ASME Journal of Solar Energy Engineering.
  6. Giguere, P. and Selig, M.S., "Freestream Velocity Measurements for Two- Dimensional Testing with Splitter Plates," accepted for publication, AIAA Journal.
  7. Giguere, P. and Selig, M.S., "Desirable Airfoil Characteristics for Large Variable- Speed Horizontal Axis Wind Turbines," accepted for publication, ASME Journal of Solar Energy Engineering.
  8. Saeed, F., Selig, M.S., and Bragg, M.B., "A Design Procedure for Subscale Airfoils with Full-Scale Leading-Edges for Ice Accretion Testing," Journal of Aircraft, Vol. 34, No. 1, January-February 1997, pp. 94-100.
  9. Guglielmo, J.J. and Selig, M.S., "Spanwise Variations in Profile Drag for Airfoils at Low Reynolds Numbers," Journal of Aircraft, Vol. 33, No. 4, July-August 1996, pp. 699-707.
  10. Selig, M.S. and Guglielmo, J.J., "High-Lift Low Reynolds Number Airfoil Design," Journal of Aircraft, Vol. 34, No. 1, January-February 1997, pp. 72-79
  11. Saeed, F. and Selig, M.S., "A Multipoint Inverse Airfoil Design Method for Slot-Suction Airfoils," Journal of Aircraft, Vol. 33, No. 4, July-August 1996, pp. 708-715
  12. Selig, M.S. and Coverstone-Carroll, V.L., "Applications of a Genetic Algorithm to Wind Turbine Design," ASME Journal of Energy Resources Technology, Vol. 118, March 1996, pp. 22-28.
  13. Selig, M.S. and Tangler, J.L., "Development and Application of a Multipoint Inverse Design Method for Horizontal Axis Wind Turbines," Wind Engineering, Vol. 19, No. 2, 1995, pp. 91-105.
  14. Selig, M.S., Maughmer, M.D., and Somers, D.M., "A Natural-Laminar-Flow Airfoil for General-Aviation Applications," J. of Aircraft, Vol. 32, No. 4, July-August 1995, pp. 710-715.
  15. Selig, M.S. and Tangler, J.L., "Development and Application of a Multipoint Inverse Design Method for Horizontal Axis Wind Turbines," Wind Engineering, Vol. 19, No. 2, 1995, pp. 91-105.
  16. Selig, M.S., "Multipoint Inverse Design of an Infinite Cascade of Airfoils," AIAA Journal, Vol. 32, No. 4, April 1994, pp. 774-782.
  17. Selig, M.S. and Maughmer, M.D., "Generalized Multipoint Inverse Airfoil Design," AIAA Journal, Vol. 30, No. 11, November 1992, pp. 2618-2625.
  18. Dini, P., Selig, M.S., and Maughmer, M.D., "Simplified Linear Stability Transition Prediction Method for Separated Boundary Layers," AIAA Journal, Vol. 30, No. 8, August 1992, pp. 1953-1961.
  19. Selig, M.S. and Maughmer, M.D., "Multipoint Inverse Airfoil Design Method Based on Conformal Mapping," AIAA Journal, Vol. 30, No. 5, May 1992, pp. 1162-1170.
  20. Selig, M.S. and Smits, A. J., "Effect of Periodic Blowing on Attached and Separated Supersonic Turbulent Boundary Layers," AIAA Journal, Vol. 29, No. 10, October 1991, pp. 1651-1658.
  21. Selig, M.S. and Smits, A.J., "The Dynamic Behavior of a Shock-Wave/Turbulent Boundary Layer Interaction," Zoran P. Zaric Memorial International Seminar, edited by S.J. Kline and N.H. Afgan, Near-Wall Turbulence, Hemisphere Publishing Corp., New York, 1990.
  22. Selig, M.S., Andreopoulos, J., Muck, K.C., Dussauge, J.P., and Smits, A.J., "Turbulence Structure in a Shock Wave/Turbulent Boundary-Layer Interaction," AIAA Journal, Vol. 27, No. 7, July 1989, pp. 862-869.
  23. Donovan, J.F. and Selig, M.S., "Low Reynolds Number Airfoil Design and Wind Tunnel Testing at Princeton University," Proceedings of the Conference on Low Reynolds Number Aerodynamics, edited by T.J. Mueller, Lecture Notes in Engineering, Vol. 54, Springer-Verlag, 1989, pp. 39-57.
Articles in Conference Proceedings

  1. Gopalarathnam, A. and Selig, M.S., "A Multipoint Viscous Design Method for Multi- Element Airfoils," AIAA 16th Applied Aerodynamics Conference, AIAA Paper 98-2404, Albuquerque, NM, June 1998.
  2. Raj, N. and Selig, M.S., "Capabilities of WTPREP for Blade Airfoil Data for HAWTs," American Wind Energy Association WINDPOWER 1998 Conference, Bakersfield, CA, April 1998.
  3. Giguere, P. and Selig, M.S., "Influence of Leading Edge Tape on the Aerodynamic Performance of Wind Turbines," American Wind Energy Association WINDPOWER 1998 Conference, Bakersfield, CA, April 1998.
  4. Du, Z. and Selig, M.S., "Effect of Rotation of Boundary Layer of Wind Turbine Blade," American Wind Energy Association WINDPOWER 1998 Conference, Bakersfield, CA, April 1998.
  5. Filippone, A. and Selig, M.S., "Low-Aspect-Ratio Wings for Wing-Ships," AIAA 36th Aerospace Sciences Meeting, AIAA Paper 98-0761, Reno, NV, January 1998.
  6. Ninham, C.P., "A Real-Time Atmospheric Turbulence Model for Aircraft Flight Simulators," AIAA 36th Aerospace Sciences Meeting, AIAA Paper 98-0688, Reno, NV, January 1998.
  7. Saeed, F., Selig, M.S., Bragg, M.B., and Addy, H., "Experimental Validation of Hybrid Airfoil Design Procedure for Full-Scale Ice Accretion Simulation," AIAA 36th Aerospace Sciences Meeting, AIAA Paper 98-0199, Reno, NV, January 1998.
  8. Du, Z. and Selig, M.S., "A 3-D Stall-Delay Model for Horizontal Axis Wind Turbine Performance Prediction," ASME/AIAA Joint Wind Energy Symposium, AIAA Paper 98-0021, Reno, NV, January 1998.
  9. Giguere, P. and Selig, M.S., "Aerodynamic Blade Design Methods for Horizontal Axis Wind Turbines," 1997 Canadian Wind Energy Conference, Quebec City, Quebec, Canada, Oct. 1997.
  10. Gopalarathnam, A., Selig, M.S. and Hsu, F., "Design of High-Lift Airfoils for Low- Aspect Ratio Wings with Endplates," AIAA 15th Applied Aerodynamics Conference, AIAA Paper 97-2232, Atlanta, GA, June 1997.
  11. Tangler, J.L. and Selig, M.S., "An Evaluation of an Empirical Model for Stall Delay Due to Rotation for HAWTs," American Wind Energy Association WINDPOWER 1997 Conference, Austin, TX, June 1997.
  12. Ninham, C. and Selig, M.S., "An Interactive Windows 95/NT Version of PROPID for the Aerodynamic Design of Horizontal Axis Wind Turbines," American Wind Energy Association WINDPOWER 1997 Conference, Austin, TX, June 1997.
  13. Giguere, P. and Selig, M.S., "New Airfoils for Small Horizontal-Axis Wind Turbines," American Wind Energy Association WINDPOWER 1997 Conference, Austin, TX, June 1997.
  14. Jasinski, W.J, Noe, S.C., Selig, M.S., and Bragg, M.B., "Wind Turbine Performance under Icing Conditions," ASME/AIAA Joint Wind Energy Symposium, AIAA Paper 97- 0977, Reno, NV, January 1997.
  15. Lyon, C.A., Selig, M.S., and Broeren, A.P., "Boundary Layer Trips on Airfoils at Low Reynolds Numbers," AIAA 35th Aerospace Sciences Meeting, AIAA Paper 97-0511, Reno, NV, January 1997.
  16. Saeed, F., Selig, M.S., and Bragg, M.B., "A Hybrid Airfoil Design Method to Simulate Full-Scale Ice Accretion Throughout a Given CL-Range," AIAA 35th Aerospace Sciences Meeting, AIAA Paper 97-0054, Reno, NV, January 1997.
  17. Fisichella, C.J. and Selig, M.S., "A Comparison of the Inflow Predictions of Three Wind Turbine Rotor Aerodynamic Analysis Codes," American Wind Energy Association WINDPOWER 1996 Conference, Denver, CO, June 1996.
  18. Giguere, P. and Selig, M.S., "Aerodynamic Performance of Small Wind Turbines Operating at Low Reynolds Numbers," American Wind Energy Association WINDPOWER 1996 Conference, Denver, CO, June 1996.
  19. Giguere, P. and Selig, M.S., "Desirable Airfoil Characteristics for Large Variable- Speed Horizontal Axis Wind Turbines," American Wind Energy Association WINDPOWER 1996 Conference, Denver, CO, June 1996.
  20. Gopalarathnam, A. and Selig, M.S., "A Multipoint Inverse Method for Multi-Element Airfoil Design," AIAA 14th Applied Aerodynamics Conference, AIAA Paper 96-2396, New Orleans, LA, June 1996.
  21. Giguere, P. and Selig, M.S., "Freestream Velocity Measurements and Corrections for Two-Dimensional Testing with Splitter Plates," AIAA 14th Applied Aerodynamics Conference, AIAA Paper 96-2388, New Orleans, LA, June 1996.
  22. Saeed, F., Selig, M.S. and Bragg, M.B., "A Design Procedure for Subscale Airfoils with Full-Scale Leading Edges for Ice Accretion Testing," AIAA 34th Aerospace Sciences Meeting, AIAA Paper 96-0635, Reno, NV, January 1996.
  23. Selig, M.S., Guglielmo, J.J., Broeren, A.P. and Giguere, P., "Experiments on Airfoils at Low Reynolds Numbers," AIAA 34th Aerospace Sciences Meeting, AIAA Paper 96-0062, Reno, NV, January 1996.
  24. Saeed F. and Selig, M.S., "A New Class of Airfoils with Slot-Suction," AIAA 34th Aerospace Sciences Meeting, AIAA Paper 96-0058, Reno, NV, January 1996.
  25. Guglielmo, J.J. and Selig, M.S., "Large Spanwise Variations in Profile Drag for Airfoils at Low Reynolds Numbers," AIAA Paper 95-1783, AIAA 13th Applied Aerodynamics Conference, San Diego, CA, June 1995.
  26. Saeed, F. and Selig, M.S., "A Multipoint Inverse Design Method for Slot-Suction Airfoils," AIAA Paper 95-1857, AIAA 13th Applied Aerodynamics Conference, San Diego, CA, June 1995.
  27. Zych, T. and Selig, M.S., "Preliminary Design and Cost Analysis of a Family of Unmanned Aerial Vehicles," AIAA Paper 95-1883, AIAA 13th Applied Aerodynamics Conference, San Diego, CA, June 1995.
  28. Selig, M.S. and Coverstone-Carroll, V.L., "Application of a Genetic Algorithm to Wind Turbine Design," ASME ETCE 14th Wind Energy Symposium, Houston, TX, January 1995.
  29. Selig, M.S. and Guglielmo, J.J., "High-Lift Low Reynolds Number Airfoil Design," AIAA Paper 94-1866, AIAA 12th Applied Aerodynamics Conference, Colorado Springs, CO, June 1994.
  30. Selig, M.S. and Tangler, J.L., "A Multipoint Inverse Design Method for Horizontal Axis Wind Turbines," American Wind Energy Association WINDPOWER 1994 Conference, Minneapolis, MN, May 1994.
  31. Selig, M.S., "Multi-Point Inverse Design of an Infinite Cascade of Airfoils," AIAA Paper 92-2650, AIAA 10th Applied Aerodynamics Conference, Palo Alto, CA, June 1992.
  32. Selig, M.S. and Maughmer, M.D., "Generalized Multi-Point Inverse Airfoil Design," AIAA Paper 91-3333, AIAA 9th Applied Aerodynamics Conference, Baltimore, MD, September 1991.
  33. Selig, M.S., and Maughmer, M.D., "A Simplified en Method for Separated Boundary Layers," AIAA Paper 91-3285, AIAA 9th Applied Aerodynamics Conference, Baltimore, MD, September 1991.
  34. Selig, M.S. and Maughmer, M.D., "A Multi-Point Inverse Airfoil Design Method Based on Conformal Mapping," AIAA Paper 91-0069, AIAA 29th Aerospace Sciences Meeting, Reno, NV, January 1991.
  35. Selig, M.S., Maughmer, M.D., and Somers, D.M., "An Airfoil for General Aviation Applications," DOT/FAA/CT-90/11, Proceedings of the 1990 AIAA/FAA Joint Symposium on General Aviation Systems, Ocean City, NJ, April 1990, pp. 280-291.
  36. Selig, M.S., Smits, A.J., and Fernando, E.M., "Periodic Slot Blowing of a Supersonic Turbulent Boundary Layer," International Workshop on the Physics of Turbulent Compressible Mixing, Princeton, NJ, October 1988.
  37. Selig, M.S., "Dynamic Control of Unsteady Shock-Wave/Turbulent Boundary-Layer Interactions," NASA Langley Research Center, AIAA 1988 Mid-Atlantic Regional Student Paper Conference, Hampton, VA, April 1988.
  38. Selig, M.S., Andreopoulos, J., Muck, K.C., Dussauge, J.P., and Smits, A.J., "Simultaneous Wall-Pressure and Mass-Flux Measurements Downstream of a Shock- Wave/Turbulent Boundary-Layer Interaction," AIAA Paper 87-0550, AIAA 25th Aerospace Sciences Meeting, Reno, NV, January 1987.
  39. Selig, M.S, "Low Reynolds Number Airfoil Design," Proceedings of the Conference on Low Reynolds Number Airfoil Aerodynamics, edited by T.J. Mueller, Notre Dame, IN, June 1985.
  40. Selig, M.S., "The Design of Airfoils at Low Reynolds Numbers," AIAA Paper 85-0074, AIAA 23rd Aerospace Sciences Meeting, Reno, NV, January 1985.
Bulletins or Reports

  1. Selig, M.S. and Lyon, C.A., "Centurion Airfoil Tests," University of Illinois at Urban-Champaign, Dept. of Aeronautical and Astronautical Engineering, AAE 98-02, UILU ENG 98-0502, February 1998, 226 pages.
  2. Selig, M.S. and Lyon, C.A., "Pathfinder Airfoil Tests: Addendum," University of Illinois at Urbana-Champaign, Dept. of Aeronautical and Astronautical Engineering, AAE 98-03, UILU ENG 98-0503, February 1998, 89 pages.
  3. Selig, M.S. and Lyon, C.A., "Pathfinder Airfoil Tests," University of Illinois at Urbana-Champaign, Dept. of Aeronautical and Astronautical Engineering, AAE 96-11, UILU ENG 96-05-11, September 1996, 155 pages.
Abstracts and other publications

  1. Selig, M.S., "Multi-Point Inverse Airfoil Design for Incompressible Flow," NASA Langley Research Center, 1991 Graduate Student Workshop, Hampton, VA, June 1991.
  2. Selig, M.S., "Multi-Point Inverse Airfoil Design," NASA Langley Research Center, Aeronautics Directorate, Briefing, Hampton, VA, October 1990.
  3. Selig, M.S., Maughmer, M.D., and Somers, D.M., "An Airfoil for General Aviation Application," AIAA, Wichita Section Techfest XVI, Wichita, KS, November 1989.
  4. Selig, M.S. and Smits, A.J., "Flow Visualization of Periodic Mass Injection in Supersonic Turbulent Boundary Layers," Paper #EI4, 39th Annual Meeting, Division of Fluid Dynamics, American Physical Society, Columbus, OH, November 1986.
  5. Donovan, J.F., Fernando, E.M., Selig, M.S., Spina, E.F., Watmuff, J.H., and Smits, A.J., "Active Control of Wall-Bounded Vortex Loops," Paper #EB5, 39th Annual Meeting, Division of Fluid Dynamics, American Physical Society, Columbus, OH, November 1986.
Software

  1. Selig, M.S. and Gopalarathnam, A., IWING, software for multipoint inverse wing design and analysis, 1997-present.
  2. Selig, M.S. and Gopalarathnam, A., MFOIL, software for multi-element airfoil design and analysis, 1995-present.
  3. Selig, M.S., PROFOIL, software for inverse airfoil design, 1994-present. Additional software contributions by Ashok Gopalarathnam and Farooq Saeed.
  4. Selig, M.S., PROPID and PROPGA, software for horizontal axis wind turbine aerodynamic design and analysis, 1993-present. Additional software contributions by Philippe Giguere and Nikhil Raj.
[Top] [UIUC Applied Aerodynamics Group]