Publications
Articles Published or Accepted for
Publication
1) Geubelle, P. H. and Knauss, W. G. (1994) “Crack
propagation at and near bimaterial interfaces: linear analysis”.
ASME J. Appl. Mech., 61, 560-566.
2) Geubelle, P. H. and Knauss, W. G. (1995) “Crack
propagation at and near bimaterial interfaces under general loading:
nonlinear analysis”. ASME J. Appl. Mech., 62:3, 601-606.
3) Geubelle, P. H. and Knauss, W. G. (1994) “Finite strains
at the tip of a crack in a sheet of hyperelastic material: 1.
Homogeneous case”. J. Elasticity, 35, 31-98.
4) Geubelle, P. H. and Knauss, W. G. (1994) “Finite strains
at the tip of a crack in a sheet of hyperelastic material: 2. Special
bimaterial cases”. J. Elasticity, 35, 99-137.
5) Geubelle, P. H. and Knauss, W. G. (1994) “Finite strains
at the tip of a crack in a sheet of hyperelastic material: 3. General
bimaterial case”. J. Elasticity, 35, 139-174.
6) Geubelle, P. H. and Knauss, W. G. (1995) “A note related
to energy-release rate computations for kinking interface
cracks”. ASME J. Appl. Mech., 62:1, 266-267.
7) Geubelle,
P. H. (1995) “Finite deformation effects in homogeneous and
interfacial fracture”. Int. J. Solids Structures, 36:6/7,
1003-1016.
8) Geubelle,
P. H. and Rice, J. R. (1995) “A spectral method for 3D
elastodynamic fracture problems”. J. Mech. Phys. Solids, 43:11,
1791-1824.
9) Morrissey, J. W. and Geubelle, P. H. (1997) “A
numerical scheme for mode III dynamic fracture problems”. Int. J.
Numer. Meth. Eng., 40, 1181-1196.
10) Geubelle,
P. H., Danyluk, M. J. and Hilton, H. H. (1997) “Dynamic mode III
fracture in viscoelastic media”. Int. J. Solids Structures, 35, 761-782.
11) Geubelle, P.
H. and Breitenfeld, M. S. (1997) “Numerical analysis of dynamic
debonding under anti-plane shear loading”. Int. J. Fracture, 85,
265-282.
12) Danyluk,
M. J., Geubelle, P. H. and Hilton, H. H. (1998) “2D and 3D
dynamic fracture in viscoelastic media”. Int. J. Solids Structures,
35:28-29, 3831-3853.
13) Geubelle, P.
H. (1997) “A numerical method for elastic and viscoelastic
dynamic fracture problems in homogeneous and bimaterial systems”.
Computational Mechanics, 20:1-2, 20-25.
14) Breitenfeld, M.
S. and Geubelle, P. H. (1998) “Numerical analysis of dynamic
debonding under 2D in-plane and 3D loading”. Int. J. Fracture, 93,
13-38.
15) Geubelle, P.
H. and Baylor, J. (1998) “Impact-induced delamination of
composites: a 2D simulation”. Composites B, 29B, 589-602.
16) Breitenfeld,
M. S. and Geubelle, P. H. (2000) “Parallel implementation of a
spectral scheme for the simulation of 3D dynamic fracture
events”. Int. J. High Performance Computing Appl., 14:1, 26-38.
17) Lin, G.,
Geubelle, P. H. and Sottos, N. R. (2001) “Simulation of fiber
debonding with friction in a model composite pushout test”. Int.
J. Solids Structures, 38:46-47, 8547-8562.
18) Geubelle,
P. H. and Kubair, D. (2001) “Intersonic crack propagation in
homogeneous media under shear-dominated loading: Numerical
analysis”. J. Mech. Physics Solids, 49:3, 571-587.
19) Zhu Q., Li
M., Geubelle, P.H. and Tucker, C. L. (2001) “Dimensional accuracy
of thermoset composites: simulation of process-induced residual
stresses”. J. Composite Materials, 35:24, 2171-2205.
20) Li, M., Zhu, Q., Geubelle, P. H. and Tucker, C. L.
(2001) “Optimal curing for thermoset matrix composites:
thermomechanical considerations”. Polymer Composites, 22,118-131.
21) Zhu Q. and
Geubelle, P.H. (2002) “Dimensional accuracy of thermoset composites:
shape optimization”. J. Composite Materials, 36:6, 647-672.
22) Wood, B., Loth,
E. and Geubelle, P. H. (2002) “A numerical methodology for
an aeroelastic supersonic viscous flow”. J. Fluid and Structures, 16:8,
1127-1144.
23) White, S. R., Sottos, N.
R., Geubelle, P. H., Moore, J. S., Kessler, M. R., Sriram, S. R.,
Brown, E. N. and Viswanathan, S. (2001) “Autonomic healing
of polymer composites”. Nature, 409, 794-797.
24) Hwang, C. and Geubelle, P. (2000) “A spectral scheme to
simulate dynamic fracture problems in composites”. Computer
Modeling in Eng. & Science, 1:4, 45-56.
25) Li Z., Bi X.,
Lambros J. and Geubelle P. H. (2002) “Dynamic fiber debonding and
frictional push-out in model composite systems: experimental
observations”. Experimental Mechanics, 42:4, 417-425.
26) Kubair,
D., Geubelle, P. H. and Huang, Y. (2002) “Intersonic crack propagation
in homogeneous media under shear-dominated loading: Theoretical
analysis”. J. Mech. Phys. Solids, 50:8, 1547-1564.
27) Kubair, D.,
Geubelle, P. H. and Huang, Y. (2003) “Analysis of a
rate-dependent cohesive model for dynamic crack propagation”. Eng.
Fracture Mech., 50:5, 685-704.
28) Bi, X., Li,
Z., Geubelle, P. H. and Lambros, J. (2002) Dynamic fiber
debonding and frictional push-out in model composite systems: numerical
simulations”. Mechanics of Materials, 34, 433-446.
29) Zhu, Q.,
Shrotriya, P., Sottos, N. R. and Geubelle, P. H. (2003)
“Three-dimensional simulation of viscoelastic response of a woven
composite substrate for multilayer PCB”. Composite Science and
Technology, 63, 1971-1983.
30) Zhang, P., Huang,
Y., Geubelle, P. H., Klein, P. A. and Hwang, K. C. (2002) “The elastic
modulus of single-wall carbon nanotubes: a continuum analysis
incorporating interatomic potentials”. Int. J. Solids Structures, 39,
3893-3906.
31) Zhang P., Huang Y., Geubelle P. H., and Hwang K. C. (2002) “On the
continuum modeling of carbon nanotubes”. Acta Mechanica Sinica, 18:5,
528-536.
32) Kubair, D.
and Geubelle, P. H. (2003) “Comparative analysis of extrinsic and
intrinsic cohesive models of dynamic fracture”. Int. J. Solids
Structures, 40:15, 3853-3868.
33) Maiti, S. and
Geubelle, P. H. (2002) “Mesoscale modeling of dynamic fracture of
ceramic materials”. Computer Modeling in Eng. & Science, 5:2,
91-101.
34) Jiang, H., Zhang, P., Liu, B., Huang, Y., Geubelle, P. H., Gao, H.
and Hwang, K. C. (2003) “The effect of nanotube radius on the
constitutive model for carbon nanotubes”. Computational Material
Science, 28, 429-442.
35) Kubair, D.,
Geubelle, P. H. and Lambros, J. (2005) “Asymptotic analysis of a mode
III stationary crack in a ductile functionally graded material”. J.
Applied Mechanics, 72:4, 461-467.
36) Maiti,
S., Rangaswamy, K. and Geubelle, P. H. (2005) “Mesoscale analysis of
dynamic fragmentation of ceramics under tension”. Acta Materialia,
53:3, 823-834.
37) Zhang, P.,
Jiang, H., Huang Y., Geubelle, P. H. and Hwang, K. C. (2004) “An
atomistic-based continuum theory for carbon nanotubes: analysis of
fracture nucleation”. J. Mech. Physics Solids, 52:5, 977-998.
38) Maiti, S.
and Geubelle, P. H. (2005) “A cohesive model for fatigue failure of
polymers”. Eng. Fracture Mechanics, 72:5, 691-708.
39) Tan, H., Liu, C. T., Huang, Y. and Geubelle, P. H. (2004) “The
effect of nonlinear debonding on the constitutive model of composite
materials: experimental and theoretical studies”. To appear in J. Mech.
Physics Solids.
40) Kandula, S.,
Abanto-Bueno, J., Geubelle, P. H. and Lambros, J. (2005) “Cohesive
modeling of dynamic fracture of functionally graded materials”. Int. J.
Fracture, 132, 275-296.
41) Hendrickx, J.,
Geubelle, P. H. and Sottos, N. R. (2005) “A spectral scheme to simulate
the mode III dynamic delamination of thin films”. Eng. Fracture Mech.,
72, 1866-1891.
42) Maiti, S. and
Geubelle, P. H. (2006) “Cohesive modeling of fatigue crack retardation
in polymers: Crack closure effect”. Eng. Fracture Mech., 73, 22-41.
43) Tan, H., Liu, C., Huang, Y. and Geubelle, P. H. (2004) “The effect
of nonlinear interface debonding on the constitutive model of composite
materials”. To appear in Int. J. Multiscale Computational Engg.
44) Tan, H.,
Huang, Y., Liu, C. and Geubelle, P. H. (2005) “The Mori-Tanaka method
for composite materials with nonlinear interface debonding”. Int. J.
Plasticity, 21, 1890-1918.
45) Tan,
H., Liu, C., Huang, Y. and Geubelle, P. H. (2005) “The cohesive law for
the particle/matrix interfaces in high explosives”. J. Mech. Physics
Solids, 53, 1892-1917.
46) Jaiman, R. K., Jiao,
X., Geubelle, P. H. and Loth, E. (2005) “Assessment of
conservative load transfer for fluid-solid interface with non-matching
meshes”. Int. J. Numer. Meth. Eng., 64, 2014-2038.
47) Matous, K.
and Geubelle, P. H (2005) “Multiscale analysis of particle debonding in
reinforced elastomers subjected to finite deformation”. Int. J. Numer.
Meth. Eng., in press.
48) Kandula, S., Abanto-Bueno, J., Geubelle, P. H. and Lambros, J.
(2005) “Cohesive modeling of quasi-static fracture in functionally
graded materials”. To appear in J. Applied Mechanics.
Articles Submitted
1) Hwang, C. G., Fiedler, R., Acharya, A. and
Geubelle, P. H. (2004) “Simulation of fluid-structure interaction and
dynamic fracture events in solid propellant rockets”. Submitted to Int.
J. Numerical Methods Eng.
2) Matous, K. and Geubelle, P. H (2005) “Finite
element formulation for modeling particle debonding in reinforced
elastomers subjected to finite deformations”. Submitted to Computer
Methods in Applied Mechanics and Engineering.
3) Dantuluri, V., Maiti, S. and Geubelle, P. H.
(2005) “Cohesive modeling of delamination in Z-pin reinforced composite
laminates”. Submitted to Composite Science and Technology.
4) Maiti, S., Shankar, C., Geubelle, P. H. and
Kieffer, J. (2005) “Continuum- and molecular-level modeling of fatigue
crack propagation in self-healing composite”. Submitted to J. Eng.
Mater. Technology.
5) Jaiman, R. K., Jiao, X., Geubelle, P. H. and Loth,
E. (2005) “Conservative load transfer along curved fluid-solid
interface with non-matching meshes”. Submitted to J. Computational
Physics.
6) Inglis, H., Matous, K., Tan, H., Geubelle, P. H.
and Huang, Y. (2005) “Cohesive Modeling of Dewetting in Particulate
Composites: Micromechanics vs. Multiscale Finite Element Analysis”.
Submitted to Mech. Materials.
Conference
Proceedings
Articles and Technical Reports:
1) Geubelle, P. H. and Knauss, W. G. (1993)
“Crack propagation in homogeneous and bimaterial sheets under general
in-plane loading : Nonlinear analysis”, in “Ultrasonic Characterization
and Mechanics of Interfaces”, S. I. Rokhlin, S. K. Datta and Y. D. S.
Rajapakse, eds; Proceeding of the 1993 ASME Winter Annual Meeting in
New Orleans, LA; Nov.28-Dec.3, 1993.
2) Geubelle, P. H. (1994) “Implementation of a
3D elastodynamic boundary-integral code on the CM-5”. Mech-240 Report,
Division of Applied Sciences, Harvard University.
3) Geubelle, P. H., Danyluk, M. J. and Hilton, H. H.
“Dynamic Mode 3 Fracture in Viscoelastic Media.” Report AAE
96-03, UILU ENG 96-0503.
4) Geubelle, P. H. and Breitenfeld, M. S.
“Numerical analysis of dynamic debonding under anti-plane shear
loading.” Report AAE 96-12, UILU ENG 96-0512.
5) Geubelle, P. H. “A numerical method for
elastic and viscoelastic dynamic fracture problems in homogeneous and
bimaterial systems.” Report AAE 96-14, UILU ENG 96-0514.
6) Jung, D., Hegeman, A., Sottos, N. R.,
Geubelle, P. H. and White, S. R. (1997) “Self-healing composites using
embedded micro-spheres,” Composite and Functionally Graded
Materials, Jacob, K., Katsube, N., and Jones, W., Eds., Vol.
MD-80, in Proceedings of the ASME International Mechanical Engineering
Conference and Exposition, pp. 265-275.
7) White, S. R., Geubelle, P. H. and Tucker, C.
L. (1998) “Process optimization for dimensional accuracy
for polymer composites.” 1998 NSF Annual Report, Grant No.
DMI-9610382, June 1998.
8) White, S. R., Geubelle, P. H. and Tucker, C.
L. (1999) “Process optimization for dimensional accuracy
for polymer composites.” 1999 NSF Design and Manufacturing
Grantee's Conference, Jan. 5-8, 1999, Long Beach, CA.
9) Wood, B., Loth, E., and Geubelle, P. H.
(1999) “Mesoflaps for aeroelastic transpiration for SBLI control”, 37th
Aerospace Sciences Meeting, Reno NV, January 1999; AIAA 99-0614.
10) Wood, B., Loth, E., and Geubelle, P. H.
(1999) “Shock/boundary-layer interaction control with aeroelastic
transpiration”. 3rd ASME/JSME Joint Fluids Engineering Conference, San
Francisco CA, July 17-21, 1999; FEDSM99-6924.
11) Geubelle, P. H., Lin, G. and Sottos, N. R.
(1999) “Simulation of a fiber pushout test in model
polyester/epoxy composite”. Proceedings of ICCM-12, Paris, July
5-9, 1999.
12) White, S. R., Geubelle, P. H. and Tucker, C.
L. (1999) “Process optimization for dimensional accuracy
for polymer composites.” 1999 NSF Annual Report, Grant No.
DMI-9610382, June 1999.
13) Geubelle, P. H., Breitenfeld, M. S., Kubair, D.
and Hwang, C. (2000) “Simulation of fundamental dynamic
fracture problems using a spectral scheme”. In Advances in
Computational Engineering & Sciences. Edited by S. N. Atluri
and F. W. Brust. Tech. Science Press. Proceedings of ICES2K
held in Annaheim, CA, in August 2000.
14) Zhu, Q. and Geubelle, P. H. (2000)
“Effects of the manufacturing process on the dimensional accuracy of
thermoset composites”. Proceedings of ASME IMECE 2000 in Orlando,
November 2000.
15) Hwang, C. and Geubelle, P. H. (2000)
“Subsonic and intersonic crack propagation in unidirectional and
cross-ply composites”. Proceedings of ASME IMECE 2000 in Orlando,
November 2000.
16) Wood, B., Loth, E., Geubelle, P. H. and McIlwain,
S. (2000) “A numerical methodology for an aeroelastic SBLI
Flow”. 38th Aerospace Sciences Meeting, Reno, NV, 10-13 January
2000. Paper AIAA 2000-0552.
17) Gefroh, D. L., Hafenrichter, E. S., McIlwain, S.
T., Loth, E., Dutton, C. J. and Geubelle, P. H. (2000)
“Simulation and Experimental Analysis of a Novel SBLI Flow Control
System”. AIAA Fluid 2000 Conference, 19-22 June 2000, Denver,
CO. Paper AIAA 2000-2237.
18) Geubelle, P. H., Huang, C., Fiedler, R.,
Breitenfeld, M. S. and Haselbacher, A. (2001) “Simulation of dynamic
fracture events in solid propellant rockets”. 37th AIAA/ASME/SAE/ASEE
JPC Conference and Exhibit, July 8-11, 2001. Paper AIAA 2001-3953.
19) Lambros, J., Bi X. and Geubelle, P. H., “The
mechanics of dynamic fiber push-out: experimental and numerical study”,
IMECE 2001, New York, NY, November 2001.
20) Lambros, J., Bi, X. and Geubelle, P. H.
“High-speed debonding and frictional sliding in composite systems:
experimental observations and numerical simulations.” Proceedings of
ICF 10. Honolulu, December 2-7, 2001.
21) Geubelle, P. H. and Maiti, S. “Simulation of
damage mechanisms in high-speed grinding of structural ceramics.”
Proceedings of ICF 10. Honolulu, December 2-7, 2001.
22) Hwang, C., Massa, L., Fiedler, R. and Geubelle,
P. H. “Simulation of convective burning and dynamic fracture in solid
propellants.” 38th AIAA/ASME/SAE/ASEE JPC Conference and Exhibit, July
7-10, 2002. Paper AIAA 2002-4342.
23) Fiedler, R. A., Breitenfeld, M. S., Jiao, X.,
Haselbacher, A. Geubelle, P. H., Guoy, D. and Brandyberry, M.
“Simulations of slumping propellant and flexing inhibitors in solid
propellant rocket motors.” 38th AIAA/ASME/SAE/ASEE JPC Conference and
Exhibit, July 7-10, 2002. Paper AIAA 2002-4341.
24) Maiti, S., Rangaswamy, K. and Geubelle, P. H.
“Fragmentation of ceramics in rapid expansion mode.” In Fracture
Mechanics of Ceramics, pp. 353-365. Proceedings of the 8th Conference
of the Fracture Mechanics of Ceramics. Houston, TX. February 25-28,
2003. Edited by R. C. Bradt, D. Munz, M. Sakai and K. W. White.
25) Geubelle, P. H., Maiti, S. and Rangaswamy, K.
“Mesoscale modeling of fragmentation of ceramics under dynamic
compressive loading. Proceedings of ICF11, Turin, Italy, March 2005.
26) Geubelle, P. H., Hendrickx, J. and Sottos, N.R.
« Spectral scheme for analysis of dynamic delamination of a thin
film.” . Proceedings of ICF11, Turin, Italy, March 2005.
27) Geubelle, P.H., Dantuluri, V., Koppaka, S.B. and
Phinney, L. « Cohesive modeling of adhesion reduction of MEMS
cantilevers through laser heating”. Proceedings of ICF11, Turin, Italy,
March 2005.
28) White, S.R., Maiti, S., Jones, A., Brown, E.N.,
Sottos, N.R. and Geubelle, P.H. « fatigue of self-healing
polymers: multiscale analysis and experiments”. Proceedings of ICF11,
Turin, Italy, March 2005.
29) Matous, K., Inglis, H. M., Gu, X., Jackson, T.,
Rypl, D. and Geubelle, P. H. "Multiscale Damage Modeling of Solid
Propellants: Theory and Computational Framework”. 41st
AIAA/ASME/SAE/ASEE JPC Conference and Exhibit, July 10-13, 2005.
Tucson, AZ. Paper AIAA 2005-4347.
30) Tan, H., Huang, Y., Geubelle, P. H., Liu, C. and
Breitenfeld, M. S. “An Energy Approach to a Micromechanics Model
Accounting for Nonlinear Interface Debonding”. 41st AIAA/ASME/SAE/ASEE
JPC Conference and Exhibit, July 10-13, 2005. Tucson, AZ. Paper
AIAA-2005-3995.
Theses
DANYLUK, M. J. Visco-elastodynamic fracture using a spectral method. M. S. Thesis. P. H. Geubelle, adviser (1996).
BAYLOR, J. S. A numerical simulation of impact-induced damage of composites. M. S. Thesis. P. H. Geubelle, adviser (1997).
HEGEMAN, A. J. Self-repairing polymers: repair mechanisms and micro-mechanical modeling. M. S. Thesis. S. R. White and P. H. Geubelle, advisers (1997).
BREITENFELD, M. S. Simulations of dynamic failure of interfaces using a spectral method. M. S. Thesis. P. H. Geubelle, adviser (1997).
WOOD, B. Aeroelastic simulations of a novel bleeding system for supersonic inlets. M. S. Thesis. P. H. Geubelle and E. Loth, advisers (1999).
VISWANATHAN, S. Micromechanical modeling of self-healing polymeric composites. M. S. Thesis. P. H. Geubelle, adviser (2000).
ZHU, Q. Dimensional accuracy of thermoset polymer composites: Process simulation and optimization. Ph.D. Thesis. P. H. Geubelle, adviser (2000).
ZACZEK, M. Adaptive cohesive volumetric finite element method for dynamic fracture simulations. M.S. Thesis. P. H. Geubelle, adviser (2001).
KUBAIR, D. Cohesive modeling of dynamic fracture: rate dependence and intersonic crack motion. Ph.D. Thesis. P. H. Geubelle, adviser (2001).
THOMAS, J. Multi-scale spectral/molecular dynamics simulation of dynamic fracture in brittle materials. M.S. Thesis. P. H. Geubelle, adviser (2002).
MAITI, S. Grain-level simulation of dynamic failure in ceramic materials. Ph.D. Thesis. P. H. Geubelle, adviser (2002).
OZHKAYA, L. Flutter analysis of a single flap system under supersonic flow. M.S. Thesis. P. H. Geubelle, adviser (2003)
KANDULA, S. Cohesive modeling of fracture in functionally graded materials. M.S. Thesis. P. H. Geubelle, adviser (2004)
BI, X. Dynamic fiber debonding and push-out in model composites. Ph.D. Thesis. P. H. Geubelle, adviser (2003)
DANTULURI, V. Cohesive modeling of delamination in Z-pin reinforced composites. M.S. Thesis. P. H. Geubelle, adviser (2004)